(System Parameter Menu) - Denso BHT-904BB User Manual

4.5.14 Downloading/Uploading the BHT System Parameter File

(SYSTEM PARAMETER Menu)

The system parameter file (file name: "_BHT.SYS") is a file containing settings such as values, LCD
contrast and beeper volume set at section "4.5.6 System Environment Settings".
The same settings can be set at another BHT by copying the system parameter file to that BHT.
Copying the System Parameter File
(1) Upload the system parameter file to the host computer and so on.
(2) Download the uploaded system parameter file at another BHT.
The system parameter file can also be copied directly between two BHT units by opening
− Supplement−
their respective UPLOAD and DOWNLOAD menus.
Refer to section "4.5.5 Copying Files between 2 BHT Units" for details of the copy method.
Uploading the System Parameter File
Create a system parameter file based on the current setting values and upload it to the host computer and
so on. After uploading, delete the created system parameter file.
Downloading the System Parameter File
Receive the system parameter file from the host computer and so on to which it was backed up, and after
setting the stored values, delete the received system parameter file.
The communication parameters, communication protocol, and interface set at "[5] Setting the
communication environment" in section "4.5.6 System Environment Settings" are used when uploading
and downloading.
Use the following procedure to download and upload the system parameter file.
1.
Press the [3] key while holding down the SF key at the SYSTEM
MENU.
The SYSTEM PARAMETER menu screen displays as shown on the
right.
[1: DOWNLOAD]:
Downloads the BHT system parameter file to the BHT user area.
[2: UPLOAD]:
Uploads the BHT system parameter file stored in the BHT.
Refer to the following section for details of the above items.
Press the Backspace/clear key to return to the SYSTEM MENU.
Barcode Handy Terminal
151