Ip.settings/Options.window - Extron electronics CrossPoint 450 Plus Series User Manual

IP Settings/Options window
The IP Settings/Options window (figure 5-7) provides a location for viewing and,
if connected via either serial port or if you are logged on via the LAN port as an
administrator, editing settings unique to the Ethernet interface. See appendix A,
"Ethernet Connection", for basic information about IP addresses. You cannot edit
any of the fields on this screen while you are logged on as a user.
N Editing variables on the IP Settings/Options screen while connected via the
LAN port can immediately disconnect the user from the switcher. Extron
recommends editing the settings on this screen using a serial port and protecting
the Ethernet access to this screen by assigning an administrator's password to
qualified and knowledgeable personnel only.
Figure 5-7 — Control program IP setting/options window
N When the control program is connected to the switcher via a serial port, the
Administrator and User Password fields are not masked. If a password has been
inadvertently changed to an unknown value, you can look up and, if desired,
change a password in this window without knowing the current password.
CrossPoint / MAV Matrix Switchers • Matrix Software 5-7