Mac Address Authentication Commands; Table 15: Mac Address Authentication - SMC Networks SMC2890W-AN Management Manual

19
mac-authentication
server
MAC Address Authentication
Commands
Use these commands to define MAC authentication on the access point. For local
MAC authentication, first define the default filtering policy, then enter the MAC
addresses to be filtered, indicating if they are allowed or denied. For RADIUS MAC
authentication, the MAC addresses and filtering policy must be configured on the
RADIUS server.

Table 15: MAC Address Authentication

Command
mac-authentication server
mac-authentication server
local address default
mac-authentication server
local address entry
mac-authentication server
local address delete
mac-authentication
session-timeout
show authentication
This command sets address filtering to be performed with local or remote options.
Use the no form to disable MAC address authentication.
Syntax
mac-authentication server [local | remote]
no mac-authentication server
local - Authenticate the MAC address of wireless clients with the local
authentication database during 802.11 association.
remote - Authenticate the MAC address of wireless clients with the RADIUS
server during 802.1X authentication.
Default
Disabled
Command Mode
Global Configuration
Function
Sets address filtering to be performed with local or
remote options
Sets local filtering to allow or deny listed addresses GC
Enters a MAC address in the local filter table
Removes a MAC address from the local filter table
Sets the interval at which associated clients will be
re-authenticated with the RADIUS server
authentication database
Shows all authentication settings, as well as the
address filter table
– 175 –
Mode Page
175
GC
176
GC 176
GC 177
GC 178
178
Exec