SMC Networks SMC2890W-AN Management Manual page 273

Appendix A
| Troubleshooting
Using System Logs
5.
Designate the SNMP host that is to receive the error messages.
6.
Repeat the sequence of commands or other actions that lead up to the error.
7.
Make a list of the commands or circumstances that led to the fault. Also make a
list of any error messages displayed.
8.
Set up your terminal emulation software so that it can capture all console
output to a file. Then enter the "show config" command to record all system
settings in this file.
9.
Contact your distributor's service engineer, and send a detailed description of
the problem, along with the file used to record your system settings.
For example:
AP(config)#logging on
AP(config)#logging host 1 10.1.0.3
AP(config)#logging level alert
AP(config)#snmp-server host 1 10.1.0.23 batman
. .
.
– 273 –