Step 3; Figure 7: Quick Start - Step 3 - SMC Networks SMC2890W-AN Management Manual

Chapter 2
| Initial Configuration
Web Quick Start

Step 3

◆
Primary and Secondary DNS Address — The IP address of Domain Name
Servers on the network. A DNS maps numerical IP addresses to domain names
and can be used to identify network hosts by familiar names instead of the IP
addresses. (The default Primary and Secondary DNS addresses are null values.)
◆
Management IP — The IPv4 address of the AP through which you can access
management interfaces.
Management IP Address — Specifies an IPv4 address for management of
■
the access point. (Default: 192.168.1.10.)
Management Subnet Mask — Indicates the local subnet mask.
■
(Default: 255.255.255.0)
◆
Prev — Returns to the previous screen.
◆
Cancel — Cancels the newly entered settings and restores the orignals.
◆
Next — Proceeds to the final step in the Quick Start wizard.
The Step 3 page of the Quick Start configures basic radio and wireless security
settings.

Figure 7: Quick Start - Step 3

The following items are displayed on this page:
Basic Setting
◆
SSID — The name of the basic service set provided by the primary VAP
interface. Clients that want to connect to the network through the AP must set
their SSID to the same as that of a VAP interface.
(Default: EAP9112A_11BGN_0; Range: 1-32 characters)
– 29 –