Resetting The Access Point - SMC Networks SMC2890W-AN Management Manual

Chapter 7
| Maintenance Settings

Resetting the Access Point

Resetting the Access Point
The following items are displayed on this page:
◆
File Backup/Restore — Downloads an operation code image file from a
specified remote FTP or TFTP server. After filling in the following fields, click
Start Export/Import to proceed.
◆
Export/Import — Select Export to upload a file to an FTP/TFTP server. Select
Import to download a file from an FTP/TFTP server.
◆
Config file — Specifies the name of the configuration file. A path on the server
can be specified using "/" in the name, providing the path already exists; for
example, "myfolder/. " Other than to indicate a path, the file name must not
contain any slashes (\ or /), the leading letter cannot be a period (.), and the
maximum length for file names on the FTP/TFTP server is 255 characters. (Valid
characters: A-Z, a-z, 0-9, ". " , "-", "_")
◆
IP Address — IP address or host name of FTP or TFTP server.
◆
Username — The user ID used for login on an FTP server.
◆
Password — The password used for login on an FTP server.
◆
Start Import/Export — Initiates the selected backup or restore.
◆
Restore Factory Setting — Click the Restore button to reset the configuration
settings for the access point to the factory defaults and reboot the system. Note
that all user configured information will be lost. You will have to re-enter the
default user name and password to re-gain management access to this device.
◆
Restore Factory Setting with Keep IP — Click the Restore button to reset the
AP's configuration settings, except for the IP, to the factory defaults and reboot
the system. Note that other than the IP settings, all user configured information
will be lost. You will have to re-enter the default user name and password to re-
gain management access to this device.
◆
Running Config To Startup Config — Click "Save" to save the running
configuration to the startup file.
The Reset page allows you to reset the access point and save the running
configuration before the reboot.
– 94 –