Table of Contents
Advertisement
Chapter 24
| Wireless Interface Commands
max-association
client-assoc-preempt
Example
AP(if-wireless 0)# max-client 64
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0)#
This command configures the maximum number of wireless clients that can
associate with a VAP interface.
Syntax
max-association <max-clients>
max-clients - The maximum number associated clients for the VAP interface.
(Range: 1-127)
Default Setting
127
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
This command sets the total maximum number of clients that may associate with a
VAP interface. If the value is greater than the setting for the maximum clients per
radio
(max-client
command), the command does not take effect.
Example
AP(if-wireless 0: VAP[0])# max-association 64
AP(if-wireless 0: VAP[0])#
This command enables a feature that implements a priority for associating clients
when the maximum has been reached. Use the no form to disable the feature.
Syntax
[no] client-assoc-preempt
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless-VAP)
– 218 –
Advertisement
Table of Contents
