Radius-Server Address; Radius-Server Port - SMC Networks SMC2890W-AN Management Manual

Chapter 17
| RADIUS Client Commands

radius-server address

radius-server port

Command Mode
Global Configuration
Example
AP(config)# radius-server primary enable
This setting has not been effective !
If want to take effect, please execute make-radius-effective command !
AP(config)#
This command specifies the primary and secondary RADIUS server address.
Syntax
radius-server {primary | secondary} address <address>
address - IP address of server.
Default Setting
10.7.16.96
Command Mode
Global Configuration
Example
AP(config)# radius-server primary address 192.168.1.9
This setting has not been effective !
If want to take effect, please execute make-radius-effective command !
AP(config)#
This command sets the RADIUS server network port.
Syntax
radius-server {primary | secondary} port <port_number>
port_number - RADIUS server UDP port used for authentication messages.
(Range: 1024-65535)
Default Setting
1812
Command Mode
Global Configuration
– 168 –