SMC Networks SMC2890W-AN Management Manual page 174

Chapter 18
| 802.1X Authentication Commands
802.1x
reauthentication-time
Example
AP(if-wireless 0: VAP[0])# 802.1x enable
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
Related Commands
show interface wireless
This command sets the time period after which a connected client must be re-
authenticated.
Syntax
802.1x reauthentication-time <seconds>
seconds - The number of seconds. (Range: 0-1440)
Default
600 seconds
Command Mode
Interface Configuration (Wireless-VAP)
Example
AP(if-wireless 0: VAP[0])# 802.1x reauthentication-time 600
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
– 174 –