Table of Contents
Advertisement
Example
AP(if-wireless 0)#a-mpdu enable
AP(if-wireless 0)#
a-msdu
This command enables and sets the Aggregate MAC Service Data Unit
(A-MSDU).
Syntax
a-msdu {enable | disable | length <length>}
enable - Enable A-MSDU.
disable - Disable A-MSDU.
length - 1024-65535 bytes.
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless)
Example
AP(if-wireless 0)#a-msdu enable
AP(if-wireless 0)#
channel
This command configures the radio channel through which the access point
communicates with wireless clients.
Syntax
channel {ht20 <ht20-channel> | ht40 <ht40-channel> | auto}
ht20-channel - The 802.11n 20 MHz channel number:
11ng mode: 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11
11na mode: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120,
124, 128, 132, 136, 140, 149, 153, 157, 161, 165
ht40-channel - The 802.11n 40 MHz channel number:
11ng mode: 01Plus, 02Plus, 03Plus, 04Plus, 05Plus, 05Minus, 06Plus,
06Minus, 07Plus, 07Minus, 08Minus, 09Minus, 10Minus, 11Minus
11na mode: 36Plus, 40Minus, 44Plus, 48Minus, 52Plus, 56Minus, 60Plus,
64Minus, 100Plus, 104Minus, 108Plus, 112Minus, 116Plus, 120Minus,
124Plus, 128Minus, 132Plus, 136Minus, 149Plus, 153Minus, 157Plus,
161Minus
Chapter 24
– 209 –
| Wireless Interface Commands
Advertisement
Table of Contents
