SMC Networks SMC2890W-AN Management Manual page 264

Chapter 31
| QoS Commands
qos vap-802.1p
retagged-user-priority
Command Usage
◆
To implement this command on a VAP interface the default VLAN ID for the VAP
must be set to any other value than 1.
◆
The VAP-to-802.1p priority QoS feature cannot be enabled together with the
802.1d-to-802.1p or 802.1d-to-DSCP features.
Example
AP(if-wireless 0: VAP[0])# qos vap-802.1p enable
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
This command sets the 802.1p priority value for all traffic on a VAP interface.
Syntax
qos vap-802.1p retagged-user-priority <user-priority>
user-priority - The 802.1p priority value for traffic on the VAP interface.
Default
0
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
◆
Requires the QoS feature be enabled using the
◆
To implement the QoS priority setting on a VAP interface, the default VLAN ID
for the VAP must be set to any other value than 1.
Example
AP(if-wireless 0: VAP[0])# qos vap-802.1p retagged-user-priority 7
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
– 264 –
qos vap-802.1p command.