Mac Address Authentication; Address Filter Default - SMC Networks 2555W-AG2 User Manual

MAC Address Authentication

Use these commands to define MAC authentication on the access point. For local
MAC authentication, first define the default filtering policy using the address filter
default command. Then enter the MAC addresses to be filtered, indicating if they are
allowed or denied. For RADIUS MAC authentication, the MAC addresses and
filtering policy must be configured on the RADIUS server.
Command

address filter default

address filter entry
address filter delete
mac- authentication server Sets address filtering to be performed with local or
mac- authentication
session-timeout
show authentication
address filter default
This command sets filtering to allow or deny listed MAC addresses.
Syntax
address filter default <allowed | denied>
• allowed - Only MAC addresses entered as "denied" in the address filtering
table are denied.
• denied - Only MAC addresses entered as "allowed" in the address filtering
table are allowed.
Default
allowed
Command Mode
Global Configuration
Example
Enterprise AP(config)#address filter default denied
Enterprise AP(config)#
Table 7-13. MAC Address Authentication
Function
Sets filtering to allow or deny listed addresses
Enters a MAC address in the filter table
Removes a MAC address from the filter table
remote options
Sets the interval at which associated clients will be
re-authenticated with the RADIUS server authentication
database
Shows all 802.1X authentication settings, as well as the
address filter table
MAC Address Authentication
Mode
GC
GC
GC
GC
GC
Exec
7
Page
7-69
7-70
7-70
7-71
7-71
7-67
7-69