Show Snmp Target; Show Snmp Users - SMC Networks SMC2890W-AN Management Manual

Chapter 15
| SNMP Commands

show snmp users

show snmp target

◆
Use the command more than once with the same filter ID to build a filter that
includes or excludes multiple MIB objects. Note that the filter entries are
applied in the sequence that they are defined.
◆
The MIB subtree must be defined in the form ".1.3.6.1" and always start with a ". " .
Example
AP(config)#snmp-server filter trapfilter include .1
AP(config)#snmp-server filter trapfilter exclude .1.3.6.1.2.1.2.2.1.1.23
This command displays the SNMP v3 users and settings.
Syntax
show snmp users
Command Mode
Exec
Example
AP# show snmp users
User List:
==================================
UserName : chris
GroupName : testgroup
AuthType : None
PrivType : None
UserName : david
GroupName : group2
AuthType : MD5,
PrivType : DES,
==================================
AP#
This command displays the SNMP v3 notification target settings.
Syntax
show snmp target
Command Mode
Exec
Passphrase: ****************
Passphrase: ****************
– 160 –