Ethernet Type; Figure 31: Ethernet Type Filter - SMC Networks SMC2890W-AN Management Manual

Ethernet Type

The Ethernet Type Filter controls checks on the Ethernet type of all incoming and
outgoing Ethernet packets against the protocol filtering table. (Default: Disabled)

Figure 31: Ethernet Type Filter

The following items are displayed on this page:
◆
Disabled — Access point does not filter Ethernet protocol types.
◆
Enabled — Access point filters Ethernet protocol types based on the
configuration of protocol types in the filter table. If the status of a protocol is set
to "ON, " the protocol is filtered from the access point.
◆
Local Management — Describes the Ethernet filter type.
◆
ISO Designator — Describes the ISO Designator identifier.
◆
Filter Status — Turns the filter on or off.
– 65 –
Chapter 5
| Advanced Settings
Access Control Lists