SMC Networks SMC2890W-AN Management Manual page 267

qos 802.1d-dscp
mapping-template
AP(if-wireless 0: VAP[0])#
This command sets the mapping template to use for the WMM 802.1d to DSCP
priority mapping on a VAP interface.
Syntax
qos 802.1d-dscp mapping-template <template-id>
template-id - The identifying number of a QoS mapping template.
(Range: 1-8)
Default
1
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
◆
The AP supports eight QoS priority mapping templates, each identified by an
ID number (1 to 8). The templates also have user-defined name that can be
configured using the
◆
The QoS priority mapping templates can be configured using the
template qos-template-priority
Example
AP(if-wireless 0: VAP[0])# qos 802.1d-dscp mapping-template 3
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
qos qos-template qos-template-name
command.
– 267 –
Chapter 31
| QoS Commands
command.
qos qos-