Table of Contents
Advertisement
Chapter 24
| Wireless Interface Commands
long-distance
acktimeout
long-distance
ctstimeout
Command Mode
Interface Configuration (Wireless)
Example
AP(if-wireless 0)# long-distance slottime 25
For making changes effective, please execute make-RF-setting-effective
command after entering all three long distance parameters!
AP(if-wireless 0)#
This command sets the acknowledge timeout for long-distance communications.
Syntax
long-distance acktimeout <timeout>
timeout - The adjusted acknowledge timeout in microseconds.
Default
64 microseconds
Command Mode
Interface Configuration (Wireless)
Example
AP(if-wireless 0)# long-distance acktimeout 56
For making changes effective, please execute make-RF-setting-effective
command after entering all three long distance parameters!
AP(if-wireless 0)#
This command sets the CTS (clear to send) timeout for long-distance
communications.
Syntax
long-distance ctstimeout <timeout>
timeout - The adjusted CTS timeout in microseconds.
Default
48 microseconds
Command Mode
Interface Configuration (Wireless)
– 224 –
Advertisement
Table of Contents
