Table 18: Client Bridge Setup
Field
Description
Station Mode
Selects 802.11g/b mode:
802.11b only or 802.11g/b
Wireless Network Name. You can enter it directly in this
SSID
field or click the Site Survey button to select from a list of
available networks.
Channel
Selects the channel (Ad-Hoc network only)
Operation Mode
Selects Ad-Hoc or Infrastructure mode
Security
Selects the option to disable security or to use WEP or WPA
security. If using WEP or WPA, click the Setup button to enter the
key(s).
Preamble Type
Selects short or long preamble
Transmit Rate
Selects the transmit rate: a fixed rate or Auto
10.2 MAC Cloning
To enable MAC cloning mode, go to the MAC Cloning field on the LAN page and
select Enabled. MAC cloning clones all the MAC addresses of the devices connected to
the Ethernet (wired) port to a single MAC address sent out wirelessly to an AP or
Repeater.