Table of Contents
Advertisement
Chapter 25
| Wireless Security Commands
transmit-key
◆
The WEP key index, length and type configured for the VAP must match those
configured for clients.
Example
AP(if-wireless 0: VAP[0])# key 1 64 hex 1234512345
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
Related Commands
key
encryption
transmit-key
This command sets the index of the WEP key to be used for encrypting data frames
transmitted from the VAP to wireless clients.
Syntax
transmit-key <index>
index - Key index. (Range: 1-4)
Default Setting
1
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
◆
If you use WEP key encryption option, the access point uses the transmit key to
encrypt multicast and broadcast data signals that it sends to client devices.
Other keys can be used for decryption of data from clients.
◆
When using dynamic keys with 802.1X, the access point uses a dynamic key to
encrypt unicast and broadcast messages to 802.1X-enabled clients. However,
because the access point sends the keys during the 802.1X authentication
process, these keys do not have to appear in the client's key list.
Example
AP(if-wireless 0: VAP[0])# transmit-key 1
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
– 236 –
Advertisement
Table of Contents
