Removing The Pcie Expansion Board - HP Integrity rx2660 User's & Service Manual

7. To remove the battery from the top of the airflow guide:
a. Push the battery retaining clip away from the battery (1) as shown in
b. Slide the battery to disengage the battery posts from the slots on the airflow guide (2).
c. Lift the battery off of the airflow guide.
Figure 80 Removing the Battery from the Airflow Guide

Removing the PCIe Expansion Board

To remove the PCIe expansion board:
1. Power off the server and disconnect the power cables. See
the Server" (page
2. If rack mounted, slide the server completely out from the rack. See
the Rack" (page
3. Remove the top cover. See
4. Pinch the board rail clips to the sides (1). See
190 Removing and Replacing Server Components
77).
141).
"Removing the Top Cover" (page
"Powering On and Powering Off
"Extending the Server from
142).
Figure 81 (page 191).
Figure 80.