HP Integrity rx2660 User's & Service Manual page 53

Figure 22 ZIF Socket, Alignment Holes and Posts, and Slot Locations
Alignment hole on the processor
1
Access hole for the ZIF socket
2
Processor 0
3
Alignment hole on the processor
4
Alignment post on the system board
5
5. Remove the plastic airflow blocker covering the processor slot (if installed).
6. Remove the protective dust cover from the processor socket (if installed).
7. Ensure the cam on the ZIF socket is in the unlocked, counterclockwise position.
Processor slot 1 on the system board
6
(Module 1)
ZIF socket on the system board
7
Processor socket dust cover
8
Alignment post on the system board
9
Module 1 label on the system board
10
Installing Additional Components 53