4.
Push the cover release lever down into the latched position (3).
5.
Lock the cover release lever (if required) by turning the cam approximately 90 degrees
clockwise (4).
6.
Replace the allen wrench on the rear panel of the server.
Figure 39 Replacing the Top Cover
Removing and Replacing the Airflow Guide
The airflow guide in the server directs airflow from the system fans to the processors and the system
memory on the system board.
Removing the Airflow Guide
To remove the airflow guide from the server:
1.
Remove the top cover. See
2.
Locate the airflow guide.
"Removing the Top Cover" (page
142).
Removing and Replacing the Airflow Guide 143