HP Integrity rx2660 User's & Service Manual page 75

Before starting this procedure, you must have the following information:
IP address for the iLO 2 MP LAN
DNS name
Obtain the factory-set DNS name from the iLO 2 MP Media Access Protocol (MAC) address
on the Network Information Tag. The Network Information Tag is on the right side of the server,
above the rail. The DNS name is 14 characters long, consisting of the letters mp followed by
the 12 characters of the MAC address, for example: mp0017A499CD77. This address is
assigned to the iLO 2 MP hardware. The iLO 2 MP hardware has a unique MAC address
that identifies the hardware on the network.
IMPORTANT: Make sure you use the MAC address to the iLO 2 MP LAN, and not the MAC
address to the server core LAN.
To interact with the iLO 2 MP through the web GUI:
1. Open a web browser and enter the DNS name or the IP address for the iLO 2 MP.
2. Log in using your user account name and password at the web login page.
Figure 34 Web Login Page
3. Click Sign In. The Status Summary page (Figure 35) appears after login.
(Figure 34).
Accessing the Host Console 75