HP Integrity rx2660 User's & Service Manual page 173

c. Rotate the processor tool counter-clockwise 180 degrees.
CAUTION:
turning the processor tool half of a full turn. The counter-clockwise 180 degree rotation
(half turn) unlocks the socket. A clockwise 180 degree rotation locks the socket. Attempting
to turn the locking mechanism more than 180 degrees can severely damage the socket.
d. Refasten the processor install tool (2.5 mm driver) to the tool holder on the airflow guide.
8. Remove the processor from the processor slot.
a. Carefully grasp the sheet metal that encases the processor.
b. Pull the processor straight up and out of the server.
9. Protect the processor from damage.
a. Install the protective pin cover on the processor connectors to shield the connector pins.
b. Place the processor in an anti-static container.
Figure 64 Opening and Closing the Processor Cage
The processor zero insertion force (ZIF) socket is locked and unlocked by
Removing and Replacing a Processor 173