Accessing The Graphic Console Using Vga - HP Integrity rx2660 User's & Service Manual

Figure 35 Status Summary Page
4. Select the web interface functions by clicking the Function tabs at the top of the page. Each
function lists options in the Navigation Bar on the left side of the page.
5. Click an option link to display data in the display screen.
6. Click Refresh to update the display.
The iLO 2 MP web interface has a robust help system. To launch iLO 2 MP help, click the Help tab
in the display screen or click the question mark key (?) at the top right corner of each page to
display help about that page.

Accessing the Graphic Console Using VGA

VGA is a method you can use to access the graphic console.
NOTE: You cannot access the iLO 2 MP using VGA.
This method requires the following elements:
Monitor (VGA connector)
Keyboard (USB connector)
Mouse (USB connector)
The graphic console output displays on the monitor screen.
IMPORTANT:
server boots to the EFI Shell. Start a console session using the RS-232 serial port method to view
console output prior to booting to the EFI Shell or to access the iLO 2 MP. See
iLO 2 MP LAN Using the RS-232 Serial Port" (page
To access the graphic console with VGA:
1. Connect the monitor, keyboard, and mouse cables.
a. Connect the monitor VGA cable to the appropriate VGA port on your server.
b. Connect the keyboard USB cable to the appropriate USB port on your server.
c. Connect the mouse USB cable to the appropriate USB port on your server.
2. Power on the server. The EFI Shell prompt appears.
76 Installing the Server
The server console output does not display on the console device screen until the
71).
"Configuring the