Removing And Replacing A Half-Length Expansion Board; Removing And Replacing A Full-Length Expansion Board - HP Carrier-Grade rx2800 i2 Server DC User's & Service Manual

Removing and replacing a half-length expansion board

1. Power off the server
2. Extend the server from the rack
3. Remove the access panel
4. Disconnect any external cables that are connected to the expansion board.
5. Remove the PCI riser cage
6. Disconnect any internal cables that are connected to the expansion board.
7. Remove expansion board.
To replace the component, see

Removing and replacing a full-length expansion board

1. Power off the server
2. Extend the server from the rack
3. Remove the access panel
4. Disconnect any external cables that are connected to the expansion board.
5. Remove the PCI riser cage
6. Disconnect any internal cables that are connected to the expansion board.
("Powering off the server" (page
("Extending the server from the rack" (page
("Removing and replacing the access panel" (page
("Removing and replacing the PCI riser cage" (page
"Installing expansion boards" (page
("Powering off the server" (page
("Extending the server from the rack" (page
("Removing and replacing the access panel" (page
("Removing and replacing the PCI riser cage" (page
94)).
45).
94)).
Removing and replacing expansion boards 105
93)).
99)).
104)).
93)).
99)).
104)).