Booting The Operating System; Processor Upgrades - HP Integrity rx2660 User's & Service Manual

1 CDROM
2 HARDDRIVE
Acpi(HWP0002,PNP0A03,400)/Pci(2|0)/Sas(Addr5000C5000034749D,Lun0)/HD(Part1,Sig4EE76936-BE45-47FA-9AC7-B0ECF2D912F2)
3 HARDDRIVE
Acpi(HWP0002,PNP0A03,400)/Pci(2|0)/Sas(Addr5000C50000347735,Lun0)/HD(Part1,Sig92C8CB4C-E0F2-11DA-8002-D6217B60E588)
4 HARDDRIVE
Acpi(HWP0002,PNP0A03,400)/Pci(2|0)/Sas(Addr5000C50000347735,Lun0)/HD(Part3,Sig92C8CB7E-E0F2-11DA-8004-D6217B60E588)
Seg Bus Dev
# # #
--- --- ---
00 00 01
00 00 01
00 00 01
Fast initialization: Enabled
System Wake-On-LAN:
Shell>
Devices, such as USB ports, that do not occupy a slot are referenced as being in slot XX. Slots that
do not contain an I/O card are not be listed in the output. Using the output, confirm that a device
detected in each slot that is populated.

Booting the Operating System

For instructions on booting to the operating system, see

Processor Upgrades

The HP Integrity rx2660 server supports upgrades from Dual-Core Intel® Itanium® 2 processors
9000 series to Intel Itanium Dual-Core Intel® Itanium® 2 processors 9150M.
CAUTION:
with similar Dual-Core Intel® Itanium® 2 processors 9000 series. Processor speed and cache size
must be identical for all processors in a system. To ensure compatibility whether upgrading,
replacing, or adding an additional processor, use processors with identical part numbers.
Failure to observe this caution results in performance degradation or system failure.
To ensure compatibility, use processors with identical part numbers.
Table 70 lists the processor upgrades that are supported, and required system firmware levels for
each server.
Table 70 Processor Upgrades
Manufacturing Part Number
AD392-2100B AD392AX
AD390-2100B AD390AX
AD391-2100B AD391AX
AD390-2100C AD390AX
AD391-2100C AD391AX
AD388-2100C
AD389-2100C
AD390-2100C AD390AX
210 Upgrades
Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)/CDROM(Entry0)/HD(Part1,Sig00000000)
Fnc Vendor Device Slot
# ID ID #
--- ------ ------ ---
00 0x103C 0x1303 XX
01 0x103C 0x1302 XX
02 0x103C 0x1048 XX
Disabled
Intel Itanium Dual-Core Intel® Itanium® 2 processors 9150M cannot be intermixed
1.6 GHz / 12 MB / Single Core
1.42 GHz / 12 MB / Dual Core
1.67 GHz / 18 MB / Dual Core
1.42 GHz / 12 MB
1.67 GHz / 18 MB
1.6 GHz / 24 MB
1.6 GHz / 18 MB
1.42 GHz / 12 MB
Path
-----------
Acpi(HWP0002,PNP0A03,0)/Pci(1|0)
Acpi(HWP0002,PNP0A03,0)/Pci(1|1)
Acpi(HWP0002,PNP0A03,0)/Pci(1|2)
Chapter 4 (page
Processor
HP Integrity rx2660 server
HP Integrity rx3600 server
HP Integrity rx6600 server
85).
System Firmware Level
greater than 01.05
greater than 02.03
greater than 02.03