HP Integrity rx2660 User's & Service Manual page 131

Table 54 I/O Card Events That Could Light System Insight Display LEDs (continued)
Diagnostic Sample IPMI Events
LED(s)
I/O Card Type E0h, 137d:26d
IO_NOT_ENOUGH_POWER_ERROR
I/O Card Type E0h, 147d:26d
IO_SLOT_STANDBY_POWER_ERROR
I/O Card Type E0h, 131d:26d
IO_HOT_PLUG_CTRL_FAILED
I/O Card Type E0h, 139d:26d
IO_PCI_MAPPING_TOO_BIG
I/O Card Type E0h, 148d:26d
IO_UNKNOWN_PCIXCAP_VAL
I/O Card Type E0h, 141d:26d
IO_PCIXCAP_SAMPLE_ERROR
I/O Card Type E0h, 123d:26d
IO_CHECK_LBA_MISSING_ERR
I/O Card Type E0h, 619d:26d
IO_CHECK_LBA_DECONFIG_ERR
I/O Card Type E0h, 133d:26d
IO_LBA_CLEAR_ERR_FAILED
I/O Card Type E0h, 144d:26d
IO_SBA_CLEAR_ERR_FAILED
I/O Card Type E0h, 146d:26d
IO_SLOT_POWER_ON_ERROR
I/O Card Type E0h, 145d:26d
IO_SLOT_POWER_DEFAULT_ERROR
I/O Card Type E0h, 136d:26d
IO_LBA_RESET_ERROR
I/O Card Type E0h, 130d:26d
IO_DLL_ERROR
I/O Card Type E0h, 143d:26d
IO_ROPE_RESET_ERROR
Cause
consumption beyond
the supported limit
Insufficient power to
power on a hot-plug
PCI-X slot
PCI slot standby
power failed
PCI-X hot-plug
controller failed
PCI bus walk (I/O
discovery) resources
exceeded
Found invalid
PCIXCAP value
PCIXCAP sampling
error
Expected I/O host
bridge (Lower Bus
Adapter) is missing
Expected I/O host
bridge (Lower Bus
Adapter) is
deconfigured
I/O LBA clear error
failed
I/O SBA clear error
failed
PCI-X slot power on
error
PCI-X slot has incorrect
default power state
I/O host bridge
(Lower Bus Adapter) is
inaccessible because
rope reset failed to
complete
PCI clock DLL error
I/O rope reset failed
to complete
I/O Backplane (LBAs/Ropes/PDH/PCI-X/PCIe Slots)
Source Notes
configuration
exceed"
SFW Display EFI
warning message
"Failed I/O slot(s)
deconfigured"
SFW Either a card /
slot problem.
Re-seat card first.
SFW Either a card /
slot problem.
Re-seat card first.
SFW Remove any
unsupported I/O
cards. Move I/O
card to an
unused PCI slot
SFW
SFW
SFW
SFW
SFW
SFW
SFW
SFW
SFW
SFW
SFW
131