HP Integrity rx2660 User's & Service Manual page 86

To correctly view the operating system console messages, go to the Boot Configuration Menu
under the EFI Boot Manager menu.
From the Boot Configuration Menu, select Console Configuration.
The Console Configuration screen displays the current configuration of the system console.
OS might use only the primary console set via boot manager or conconfig command
/----------------------------------\
|
| HP-UX |
| In/---| P
| EF|^
| iL| Ad|
| Co| Ed\-----------------------------------------------------------/
| Su| Remo
| HP| Edit O/---------------------------------------------------\
| --| AutoBo|
| Bo| BootNe| <ENTER> to enable/disable
| Sy| ------| P/p to select primary
| Se| Driver| T/t to select terminal type
| | Consol| B/b to select baud rate
\---| ------|
| System\---------------------------------------------------/
|
\-------------------------/
Use <^|v> to scroll
Select the appropriate console configuration for your environment.
NOTE:
perform a server reset to activate your configuration changes.
IMPORTANT:
to enable the OS console messages to display to the proper device. This applies to all operating
systems.
To manage the boot options list for each server, use the EFI Shell, the EFI Boot Option
Maintenance Menu, or operating system utilities.
At the EFI Shell, use the bcfg command to support list and manage the boot options list for
HP-UX.
The EFI Boot Option Maintenance Menu provides the Add a Boot Option, Delete Boot Option(s),
and Change Boot Order menu items (use this method if you must add an EFI Shell entry to the
boot options list).
Operating system utilities for managing the boot options list include the HP-UX setboot
command.
NOTE:
Maintenance Menu.
To manage the boot options list for each server, use the EFI Shell, the EFI Boot Configuration
Menu, or operating system utilities.
At the EFI Shell, the bcfg command supports listing and managing the boot options list for
all operating systems, except Microsoft Windows. On HP Integrity servers with Windows
installed, the \MSUtil\nvrboot.efi utility is provided for managing Windows boot options
from the EFI Shell. For HP Integrity servers with OpenVMS installed, the \efi\vms\
vms_bcfg.efi and \efi\vms\vms_show utilities are provided for managing OpenVMS
boot options.
86 Booting and Shutting Down the Operating System
EFI Boot Manager ver 2.00 [14.62]
/-----------------------------------------------------------\
Serial Acpi(HWP0002,PNP0A03,0)/Pci(1|2) Vt100+ 9600
| NC VGA Acpi(HWP0002,PNP0A03,0)/Pci(4|0)
Console Help
<ENTER> to Select
When exiting the Console Configuration screen, be sure to save your changes and
When selecting a console as Primary, all other consoles must be set to NC
In some versions of EFI, the Boot Configuration Menu is listed as the Boot Option
/----------------------------------\
| System Overview
Console Configuration
Console Status
P - Primary
S - Secondary
NC - Not Configured
| |
\----------------------------------/
<ESC> or <X/x> for Previous Menu
|
|
| |
| |
| |
| |
|
|
|
| |
|us |
|ve |
|ve |
| |
| |
|
|