Removing The Pcie Expansion Board; Removing The Battery From The Airflow Guide - HP Integrity rx2660 User's & Service Manual

7. To remove the battery from the top of the airflow guide, do the following.
a. Push the battery retaining clip away from the battery (1) as shown in
b. Slide the battery to disengage the battery posts from the slots on the airflow guide (2).
c. Lift the battery off of the airflow guide.
Figure 6-39 Removing the Battery from the Airflow Guide

Removing the PCIe Expansion Board

To remove the PCIe expansion board, follow these steps:
1. Power off the server and disconnect the power cables. See
the Server" (page
2. If rack mounted, slide the server completely out from the rack. See
from the Rack" (page
3. Remove the top cover. See
4. Pinch the board rail clips to the sides (1). See
Board".
190 Removing and Replacing Server Components
78).
142).
"Removing the Top Cover" (page
"Powering On and Powering Off
143).
Figure 6-40 " Removing the PCIe Expansion
Figure 6-39.
"Extending the Server