Content Filter Url Cache Commands - ZyXEL Communications UAG Series Reference Manual

Chapter 43 Content Filtering
Table 134 content-filter profile Commands Summary (continued)
COMMAND
no content-filter profile filtering_profile
commtouch-url match {log}
no content-filter profile filtering_profile
commtouch-url offline {log}
no content-filter profile filtering_profile
commtouch-url unrate {log}
show content-filter profile [filtering_profile]

43.8 Content Filter URL Cache Commands

The following table lists the commands that you can use to view and configure your UAG's URL
caching. You can configure how long a categorized web site address remains in the as well as view
those web site addresses to which access has been allowed or blocked based on the responses from
the external content filtering server. The UAG only queries the external content filtering database
for sites not found in the cache.
Use the
configure terminal
commands. See
commands.
Table 135 content-filter url-cache Commands
COMMAND
[no] content-filter cache-timeout _timeout
show content-filter url-cache [all-category] [begin
url_cache_range end url_cache_range] [_count]
show content-filter url-cache
content-filter url-cache test
url
exit
220
command to enter the configuration mode to be able to use these
Table 131 on page 214 for details about the values you can input with these
DESCRIPTION
Has the UAG not log attempted access to web pages that
match the CommTouch profile's selected managed
categories.
Has the UAG not log access to web pages if the
CommTouch external content filtering database is
unavailable.
Has the UAG not log access to web pages that the
CommTouch external web filtering service has not
categorized.
Displays the specified content filtering profile's settings or
the settings of all them if you don't specify one.
DESCRIPTION
Sets how long to keep a content filtering URL cache entry
before discarding it. The
no
Displays the contents of the content filtering URL cache. You
can specify a range and number of entries to display.
Displays the contents of the content filtering URL cache.
Enters the sub-command mode for testing whether or not a
web site is saved in the UAG's database of restricted web
pages.
Tests whether or not a web site is saved in the UAG's
database of restricted web pages.
Leaves the sub-command mode.
command clears the setting.
UAG CLI Reference Guide