To Specify Paper Type - Konica Minolta BIZHUB 360 User Manual

Basic Copy Operations

To specify paper type

Specify the special paper type for the bypass tray.
After a setting change has been made, the machine may adjust the fixing
temperature or limit the output tray to be used depending on the specified
paper type.
This setting also prevents the special paper loaded in bypass tray from being
fed automatically when Auto Paper Select or Auto Tray Switch functions.
When using OHP transparencies or any special paper, be sure to specify this
setting to avoid unexpected feeding.
0 This setting is indispensable for OHP transparencies, thick paper, or thin
paper to be loaded in the bypass tray.
0 Setting options are Recycled, Thick Paper, Thin Paper, OHP, Envelope,
Letterhead, Trace, User, Labels, and Colored Paper.
0 When printing on envelopes, open the right-hand door of the machine
and pull up the envelope levers. For details, see "To load paper into the
bypass tray" on page 3-61.
0 The special paper setting of bypass tray will be cleared to the normal type
setting, when the machine is reset to the initial setting.
1
Touch [Paper] on the Basic Screen.
The Paper Screen will be displayed.
bizhub 500/420/360 (Phase 3)
4
4-33