Konica Minolta BIZHUB 360 User Manual page 262

6
10
Confirm settings on the Insert Sheet Check Screen, and make setting
change, if desired.
– To change the insertion tray source, return to step 8.
To change the insertion type, return to step 9.
– To change insertion locations, touch [Edit] and return to step 7.
11
Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Insert Sheet Screen or Insert Sheet Check
Screen to cancel the setting change.
12
Select additional copy conditions, as desired.
13
Press [Start] on the control panel.
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the Basic
Screen.
6-20
Application Functions
bizhub 500/420/360 (Phase 3)