Konica Minolta BIZHUB 360 User Manual page 115

Before Making Copies
4
Align the trailing-edge guide with the paper.
– Push both ends of the trailing-
edge guide until it aligns with the
paper. Release the pressure
applied to the ends of the trailing-
edge guide to lock it again.
5
Fully push in the paper tray.
The previously displayed red
indicator in the paper-empty
indicator on the right-hand side of
the tray disappears.
Reminder
If the lateral guides are not positioned correctly for the loaded paper, the
paper size will not be detected successfully. Be sure to adjust the lateral
guides to the size of the loaded paper.
Make sure to align the trailing-edge guide exactly with the paper.If there
is space between the trailing-edge guide and the paper, the paper will not
be fed correctly.
Do not load so much paper that the top of the stack does not exceed the
paper capacity (,) mark.
Flatten the paper before loading it to prevent any trouble.
Do not touch the film located at the right-hand end of the tray.If it is
accidentally bent or folded, this will cause paper to be fed incorrectly.
bizhub 500/420/360 (Phase 3)
3
3-55