Konica Minolta BIZHUB 360 User Manual page 204

4
– The Copy Operating Screen may appear when scanning for the
original is completed and printing job starts.
In this case, touch [Program Next Job] on the screen to proceed.
2
Position the original for the next job.
3
Select copy conditions and enter the print quantity for the next job.
4
Press [Start] on the control panel.
When the current printing job is
completed, the reserved job will
automatically start printing.
5
To reserve more than one job, repeat the steps from 1 to 3.
4-76
Basic Copy Operations
bizhub 500/420/360 (Phase 3)