Konica Minolta BIZHUB 360 User Manual page 310

6
7
Select the binding position of the spread original.
– For the spread original to read from the left page to the right page,
touch [Left Bind] to highlight it.
On the contrary, if the spread original reads from the right page to
the left page, touch [Right Bind].
8
Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Booklet Pagination Screen to cancel the
setting change.
9
Select additional copy conditions, as desired.
10
Press [Start] on the control panel.
The machine will start scanning the original, then printing when ready
for output.
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the
Application Screen or Basic Screen.
6-68
Application Functions
bizhub 500/420/360 (Phase 3)