Konica Minolta BIZHUB 360 User Manual page 714

16
3
Touch [Input] in each area of Copy, Scan, and Fax, then use the control
panel keypad to enter the desired period of time to be elapsed before
Auto Reset is activated.
When touching [OFF] to highlight it, Auto Reset for each is not
activated.
4
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Reset Setting Screen will be restored.
5
If further changes are required, touch the desired key.
16-92
Utility <Administrator Setting>
bizhub 500/420/360 (Phase 3)