To Stop/Resume/Delete A Job; To Stop/Resume The Job In Process - Konica Minolta BIZHUB 360 User Manual

4
4.12

To Stop/Resume/Delete a Job

This section describes how to stop, resume, or delete the job currently in
process (scanning, printing, or both of scanning and printing).

To stop/resume the job in process

0 This procedure is effective only for the current job in process.
0 The reserved job which already started scanning cannot stop its
operation. Touch [Job List] to delete the scanned data.
For details, see "Job Management (Job List)" on page 9-3.
1
Press [Stop] on the control panel
during scanning/printing.
The scanning/printing will be
suspended and the Job Stop Screen
will be displayed.
2
Press [Start] on the control panel.
All suspended jobs will resume the
operation.
4-78
Basic Copy Operations
bizhub 500/420/360 (Phase 3)