Konica Minolta BIZHUB 360 User Manual page 662

16
3
Select the default output tray to be used in copy jobs.
– Touch [Copy], then select the desired tray number under Default in
the right side area of the screen.
4
Similarly, touch [Print], [Reports], and [Fax] to select the desired output
tray.
5
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Output Setting Screen will be restored.
6
If further changes are required, touch the desired key.
16-40
Utility <Administrator Setting>
bizhub 500/420/360 (Phase 3)