Konica Minolta BIZHUB 360 User Manual page 158

4
3
Touch [Custom Size].
The Custom Size Screen will be displayed.
4
Enter the length (X) and width (Y) of the paper.
– Check that [X] is highlighted, then enter the size of side X from the
control panel keypad. (148.0 mm - 431.8 mm)
– Touch [Y] to highlight it, then enter the size of side Y from the
control panel keypad. (92.0 mm - 297.0 mm)
What should be done if the message "Input Error" is displayed and
?
entered value is ignored?
The value just entered is out of available range.
% Press [C] (Clear) on the control panel, then reenter the correct value.
5
Touch [Store].
The Store Custom Size Screen will be displayed.
4-30
Basic Copy Operations
bizhub 500/420/360 (Phase 3)