Supplies & Handling
11
Supplies & Handling
11.1
When the Message "Replenish Paper" Is Displayed
If a tray has run out of paper while copying or after printing, the message
"Replenish paper." is displayed.
Check which paper tray appears highlighted in the touch panel, and then
load it with paper.
- To load paper in tray 1/2, see "To load paper in tray 1/2 (or tray 3/4)" on
page 3-54.
- To load paper into a paper feed cabinet PC-202 (tray 3/4), see "To load
paper in tray 1/2 (or tray 3/4)" on page 3-54.
- To load paper into a paper feed cabinet PC-402 (tray 3), see "To load
paper in tray 3" on page 3-56.
- To load paper into a large capacity unit LU-201, see "To load paper into
a large capacity unit" on page 3-59.
- To load paper into the bypass tray, see "To load paper into the bypass
tray" on page 3-61.
bizhub 500/420/360 (Phase 3)
11
11-3