Reset Setting > 3 Job Reset - Konica Minolta BIZHUB 360 User Manual

Utility <Administrator Setting>
9 Reset Setting > 3 Job Reset
Select whether or not to initialize the settings currently specified when the
machine takes it that the user has changed or original document is loaded
into the ADF.
Also, select the copy condition to be initialized each time a single job has
been completed. The following settings are provided.
Staple Setting: Initializes specified conditions in Staple mode.
Original Set Bind Direction: Initializes specified conditions in Original
Direction and Margin.
Reset Data After Job: Initializes all copy conditions specified for the
completed job.
Note
This machine considers the following cases as user change (When
Account is Changed):
- When the optional key counter or magnetic card of the data controller
is removed.
- When [Access] is pressed after the User Authentication/ Account Track
setting has once been performed.
bizhub 500/420/360 (Phase 3)
16
16-93