Konica Minolta BIZHUB 360 User Manual page 386

7
5
Select Sort or Group, and set Offset to use offset output.
– To set sort, touch [Sort] to highlight it.
– To set group, touch [Group] to highlight it.
– To set sort in alternating crisscross pattern, touch [Sort] and [Offset]
to highlight them.
– To set group in alternating crisscross pattern, touch [Group] and
[Offset] to highlight them.
6
Touch [OK].
The Basic Screen will be restored.
7
Specify any necessary copy settings.
– Auto Paper Select may be released automatically depending on the
setting you made.
When using Crisscross sorting or Crisscross grouping, make sure
that other copy conditions do not conflict with Auto Paper Select.
8
Press [Start].
The scan/print job will start.
Note
To cancel changes to the settings, touch [Cancel] on the Finishing
Screen.
To cancel all settings, press [Reset].
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the Basic
Screen.
7-6
Finishing/Folding
bizhub 500/420/360 (Phase 3)