Konica Minolta BIZHUB 360 User Manual page 407

Finishing/Folding
4
Touch [Half Fold] or [Fold & Staple] to highlight it.
5
Touch [OK].
The Basic Screen will be restored.
6
Specify any necessary copy settings.
7
Press [Start].
The scan/print job will start.
Reminder
Finisher FS-510 trays gradually go up/down while printed materials
output, depending on the tray selected.With Saddle stitcher SD-502 or
Mailbin kit MT-501, the operation of the trays become greater. DO NOT
allow any object to interfere with the operation of the tray around the
finisher, as any interference may cause damage to the finisher.
Note
To cancel changes to the settings, touch [Cancel] on the Finishing
Screen.
To cancel all settings, press [Reset].
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the Basic
Screen.
bizhub 500/420/360 (Phase 3)
7
7-27