Konica Minolta BIZHUB 360 User Manual page 359

Application Functions
Do you want to change the currently entered value using control
?
panel keypad?
% Press [C] (Clear) on the control panel, then enter the correct value.
What if the value just entered is out of available range?
?
% The Input Error message will be displayed. Press [C] (Clear) on the
control panel, then reenter the correct value.
6
Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Set Numbering Screen to cancel the setting
change.
7
Select additional copy conditions, as desired.
8
Press [Start] on the control panel.
The machine will start scanning the original, then printing when ready
for output.
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the
Application Screen or Basic Screen.
bizhub 500/420/360 (Phase 3)
6
6-117