Paper Source
Select the paper drawer loaded with the paper.
If "Auto" is selected, the paper drawer loaded with paper of the size specified in the
"Output Size" list is used.
The available settings differ depending on the options that are installed.
Settings: Tray 1, Tray 2 through Tray 5 (options), Bypass
Note
If "Hagaki" or an envelope or non-standard size is selected in the "Original
Size" list, only "Tray 1" and "Bypass" are available.
Only "Tray 1" and "Bypass" are available when "Paper Type" is set to "OHP",
"Thick Paper" or "Envelope".
Paper Type
Select the type of paper to be printed on.
Settings: Plain Paper, OHP, Thick Paper, Envelope
Note
A setting can be selected only when "Paper Source" is set to "Tray 1" or "By-
pass".
"OHP" can be selected only when "Original Size" is set to "Letter" or "A4".
Tray
Bypass tray
4-19