Konica Minolta BIZHUB 360 User Manual page 180

4
3
Touch the icon key in the Zoom with Constant X and Y Ratio area to
highlight it, then enter the desired magnification ratio from the control
panel keypad.
– When registering a proportional zoom ratio, enter the value within
the range from e0.250 to e4.000.
– When changing the Minimal ratio setting, enter the value within the
range from e0.900 to e0.999.
Entered ratio will be displayed in the Zoom with Constant X and Y Ratio
area.
What should be done if the message "Input Error" is displayed and
?
entered size is ignored?
The value just entered is out of available range.
% Press [C] (Clear) on the control panel, then reenter the correct value.
4
Touch [Set Zoom].
The Set Zoom Screen will be displayed.
5
Touch the key to be stored with the entered value or touch [Minimal] to
highlight it.
4-52
Basic Copy Operations
bizhub 500/420/360 (Phase 3)