To Specify Finisher Output Mode - Konica Minolta BIZHUB 360 User Manual

Finishing/Folding

To specify finisher output mode

0 As the default setting, Sort is selected. No limit is established in Sort
mode.
0 Some copy conditions are incompatible with Group mode. For details,
see "Copy Conditions Incompatible with Finishing/Folding" on
page 7-32.
0 When making copies using postcard, trace, or OHP transparencies on
the machine with Finisher FS-511 installed, be sure that the Secondary
(sub) tray is selected as an output tray.
0 Each output tray of Finisher FS-510 and FS-511 has a limit in capacity.
Be careful not to exceed the limit. For details, see "Paper Tray/ Output
Tray Capacity" on page 10-5.
1
Position the original to be copied.
2
Using the keypad, enter the desired number of copies.
3
Touch [Finishing] on the Basic Screen.
The Finishing Screen will be displayed.
4
Select Sort or Group, and set Offset to use offset output.
– To set Sort mode, touch [Sort] to highlight it.
– To set Group mode, touch [Group] to highlight it.
– To set Sort in offset output, touch [Sort] and [Offset] to highlight
them.
bizhub 500/420/360 (Phase 3)
7
7-9