General Copy Operation; How To Make A Basic Copy - Konica Minolta BIZHUB 360 User Manual

Basic Copy Operations
4 Basic Copy Operations
4.1

General Copy Operation

This section describes how to make a basic copy.

How to make a basic copy

0 The following procedure is basic and not always applicable to the
operation of selected copy conditions. When using a specific function, be
sure to follow the procedure described in each section.
1
Press [Copy] on the control panel to display the Basic Screen in Copy
mode.
– The following type of Basic Screen will be displayed as factory
default.
– The left side area of the screen can also provide the current job list.
See "1 Sub Screen Display ON/OFF" on page 15-24 for details.
bizhub 500/420/360 (Phase 3)
4
4-3