Konica Minolta BIZHUB 360 User Manual page 305

Application Functions
10
Specify the interval between repeated images.
– Touch [Repeat Interval Setting] to display the Repeat Interval
Setting Screen.
– Use [+] and [–] to enter a fraction in 0.1 mm increments.
Touch the bidirectional arrow key to move the cursor, then use [+],
[–], or control panel keypad to enter whole number part of the
desired value.
– If the interval does not need to be specified, touch [No Shift].
What is the actual function of Repeat Interval Setting?
?
% In normal 2 Repeat mode, a copy of the original image will be
repeated twice from the edge of copy paper.
When the Repeat Interval Setting is specified, the two copy images
are positioned equally apart from the center of copy paper, with
specified value to be an interval between the two images.
What should be done if wrong value is entered or Input Error
?
message is displayed?
% Press [C] (Clear) on the control panel, then reenter the correct value.
11
Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Image Repeat Screen, 2/4/8 Repeat Screen,
or Repeat Interval Setting Screen to cancel the setting change.
12
Select additional copy conditions, as desired.
13
Press [Start] on the control panel.
The machine will start printing when ready for output.
bizhub 500/420/360 (Phase 3)
6
6-63