Supplies & Handling
To replace the staple cartridge for Finisher FS-511
0 Be sure to replace the staple cartridge after displaying the message,
otherwise the machine may be damaged.
1
Slide the finisher to the left.
–
Holding the finisher handle on the
top, slide the finisher to the left
until it stops.
2
Open the finisher right door FN7.
3
Turn the dial to the left until the two
staplers come to the center.
4
Pull up then forward the staple
holder to remove it from the stapler.
–
Please check the message which
stapler to remove.
Staple cartridge 1: rear side
Staple cartridge 2: front side
bizhub 500/420/360 (Phase 3)
11
11-11